Tarva 6 Drawer Dresser Design Ideas

Stylish Tarva 6 Drawer Dresser View in gallery

Tarva 6 drawer dresser – With basic carpentry skills and the right tools, you will be able to build or replace your own boxes. You can make your own custom kitchen cabinets at a fraction of the cost of buying them, with the addition of a personal, creative accent piece for the bedroom.

Build a tarva 6 drawer dresser, measure the width and depth of the box. When measurements, consider drawer slides. There is a wide range of drawer slides in the market, so you may want to purchase and install the glasses in your cupboard before you build the boxes. Cut the sides, front and back of the boxes from the timber. Use the measurements from step one to measure out and cut your two sides, front and back of the box. First, cut the timber to the desired height of your drawer. Next, cut the length to ensure that all four sides will be uniform in height.

After that to build tarva 6 drawer dresser, seam joints to make a robust fit to box corners. Next, check your router and set the depth of about three quarters of the width of your wood. Then run the router along the left side and the right side of both face piece and your back cover. Fit the pieces together. For the bottom of the box, you have a choice of either routing out a line thickness of the bottom so it slides into the mount, or you can install it directly to the bottom. Then nail or screw your drawer sides together. Put wood glue on all joints and use clamps to hold them in place so they are solid. Install the bottom of the slots routed around the box.